Front Exhaust Pipe, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Disconnect the connector -1-.
-- Loosen the clamping sleeve -2- and slide it toward the rear.
-- Remove the bolts -1-.
-- Loosen the bolt -2- and remove the clamp.
-- Remove the tunnel brace. Refer to TUNNEL BRACE, REMOVING AND INSTALLING .
-- Remove the front exhaust pipe.