LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Exhaust & Emissions Controls System (Service Information - CRUA)) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Exhaust Door Control Unit -J883-, REMOVING AND INSTALLING >> Removing

Exhaust Door Control Unit -J883-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- If equipped, remove the heat shield boot from the connector.

-- Disconnect the connector -1-.

GWWA26-11272Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows-, and remove the Exhaust Door Control Unit -J883-.

scientia non olet · About LEMON Manuals