EGR Cooler - Tightening Specifications And Sequences
WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
-- Tighten the bolts in the steps shown in the sequence:
| Step |
Bolts |
Tightening Specification |
| 1. |
Screw-type clamp -3- |
7 Nm |
| 2. |
-1 and 2- |
Install by hand all the way |
| 3. |
-1 and 2- |
20 Nm |