EGR Valve 2 -GX6-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Remove the connection on the turbocharger. Refer to TURBOCHARGER CONNECTIONS, REMOVING AND INSTALLING .
-- Loosen the hose clamps -1 and 2- and remove the EGR hose.
-- Push the heat shield aside and disconnect the connector -3-.
-- Remove the bolts -arrows- and remove the EGR Valve 2 -GX6-.