LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Exhaust & Emissions Controls System (Service Information - CRUA)) >> 26 Exhaust System, Emission Controls >> Exhaust Gas RECIRCULATION (EGR) >> EGR Temperature Sensor -G98-, REMOVING AND INSTALLING >> Installing

EGR Temperature Sensor -G98-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal And Note The Following: 

NOTE:

Protect the exhaust gas temperature sensor against knocks and impacts. A dropped exhaust gas temperature sensor may not be used again.

-- Electrical connections and routing. Refer to COMPONENT LOCATION OVERVIEW - RELAY CARRIERS, FUSE PANELS AND E-BOXES

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals