LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System (Cylinder Head & VALVETRAIN - CXBA, CNSA, CXBB, CNSB, CXCA, CXCB) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Overview - Camshaft Timing Chains >> Overview - Camshaft Timing Chain, Engine Codes CHHB, CNTA, CXCA, CXDA, CXCB And CXDB >> Tightening Specification and Sequence for Bearing Bracket with Steel Bolts

Tightening Specification and Sequence for Bearing Bracket with Steel Bolts

GWWA15-11797Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

If an adapter sleeve is installed, this will be moved with the bolt -1- in the cylinder head.

-- Tighten the bolts in the steps shown in the sequence:

Step Bolts Tightening Specifications
1. -1- 3 Nm
2. -1 to 6- 9 Nm
scientia non olet · About LEMON Manuals