Monitor-ID $3D: EVAP Valve Function Check
-- CONNECT: Scan Tool
-- START ENGINE: Idle
-- SELECT: Mode 06
-- SELECT: "Monitor-ID $3D"
-- SELECT: "Test-ID".
-- CHECK: values listed below at idle.
| Test-ID | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| $8B | P0441 | Tank vent valve - Function check, test using cross-correlation | 0.1 | 655.35 | Refer to DTC P0441 in the DTC summary table. Engine Control Module --, 2016 MY => P0441 . |
-- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition OFF.