LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling Fan >> Engine Cooling System (Service Information - CXBA, CNSA, CXBB, CNSB, CXCA, CXCB) >> 19 Cooling System >> Radiator/Coolant Fan >> Radiator, Removing And Installing >> Removing

Radiator, Removing And Installing: Removing

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove upper left coolant hose from radiator -arrow-.

GWWN19-10623Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .

-- Unclip the air guides -1- on both sides of the lock carrier -2- in direction of -arrows-.

GWWN19-10976Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- To do this release the catches -3- in the direction of -arrow- and remove the air guide. Ignore the lower arrows.

-- Through the openings in the lock carrier, press the left and right radiator locking rings -arrow- and remove the coolant cooler from the charge air cooler.

GWWA19-11623Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pivot the radiator to the engine and lift upward from the charge air cooler bracket. Remove radiator downward.