Radiator, Removing And Installing: Installing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If there are small impressions on the fins, pay attention to the following. Refer to COOLER AND CONDENSER ASSEMBLY .

-- Replace the O-rings.

-- Place the radiator at an angle in the lower charge air cooler mount and engage the radiator with each other -arrow-. Pull to make sure the catch is secure.

-- Install the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .

-- Connect the coolant hose to the coupling. Refer to Connect the Coolant Hose to the Coupling .

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .

NOTE:

All of the coolant must be changed if the radiator was replaced.