Fan Shroud, Removing And Installing: Removing
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Remove the noise insulation. Refer to NOISE INSULATION .
-- Loosen the hose clamps -arrows- and remove the left charge air hose -A-.
CAUTION:
There is a risk of injury if the radiator fan turns on by itself.
- Disconnect the connectors.
-- Disconnect the radiator fan connector -1-. To do this push the securing device in direction of -arrow A- in the direction of the arrow and push the release downward.
-- Push the left and right locking latches for the fan shroud at the same time in direction of -arrow B- and remove the fan shroud upward from the radiator and remove from underneath.