Engine Temperature Control Actuator -N493-, REMOVING AND INSTALLING: Removing

CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.

Mandatory Replacement Parts

-- Remove the coolant pump. Refer to COOLANT PUMP, REMOVING AND INSTALLING .

-- Remove the Throttle Valve Control Module -GX3-. Refer to Throttle Valve Control Module -GX3-, REMOVING AND INSTALLING .

-- Remove the coolant pipe from the intake manifold -arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lift the clamp -1-, and remove the coolant hoses.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the connector -1- from the Engine Temperature Control Actuator -N493-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1 to 5-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Engine Temperature Control Actuator -N493- from the centering pin and disconnect it from the engine oil cooler.