Coolant Shut-Off Valve -N82-, REMOVING AND INSTALLING: Removing

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Loosen the hose clamp -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove bolt -1-, push the left air guide pipe left.

-- Disconnect the connector -3- from the Secondary Air Injection Sensor 1 -G609-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the connecting pipe -2- by pressing the locking ring together on both sides, and set it aside.

-- Disconnect the connector -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Clamp the coolant hoses on Coolant Shut-Off Valve -N82- with the Hose Clamps - Up To 25mm:3094 .

NOTE:

Place a cleaning cloth underneath, to catch coolant leaking out.

-- Loosen the hose clamps -1- and remove the coolant hoses.

-- Remove the bolts -arrows-, and remove the Coolant Shut-Off Valve -N82-.