LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling Fan >> Engine Cooling System (Service Information - CXBA, CNSA, CXBB, CNSB, CXCA, CXCB) >> 19 Cooling System >> Coolant Pump/Thermostat >> Coolant Pump Toothed Belt, Removing And Installing >> Installing

Coolant Pump Toothed Belt, Removing And Installing: Installing

Install in reverse order of removal. Note the following: 

-- Replace the bolt for the drive wheel.

-- Drive gear installation position: the collar on the drive gear faces the transmission.

-- Position the toothed belt and tighten the bolts.

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals