LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf R Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> COOLING SYSTEM [4-Cylinder Direct Injection (2.0L, 4V, Turbocharger, Chain Drive, Generation III)] >> 19 Cooling System >> Coolant System/Coolant >> Coolant System, Checking For Leaks Procedure >> Notes

Coolant System, Checking For Leaks Procedure: Notes

Special Tools And Workshop Equipment Required 

Fig 1: Identifying Coolant Reservoir Cap
GWWN10-10689Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
WARNING:

The coolant system is under pressure when the engine is warm.

Risk of scalding due to hot steam and hot coolant.

Reduce pressure by covering the coolant reservoir cap with a cloth and carefully opening.

-- Open the coolant reservoir cap -arrow-.

-- Position the :VAG1274B  with the :VAG1274/8  on the coolant reservoir.

Fig 2: Cooling System Tester V.A.G 1274 Connected To Coolant Reservoir
GWWA19-10645Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Generate approximately 1 bar (14.5 psi) pressure using the cooling system tester hand pump.

-- If the pressure falls, search for leaks and correct the problem.