Coolant Pump, Removing And Installing: Installing

Fig 1: Identifying Controller Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install In Reverse Order Of Removal And Note The Following: 

-- Install the coolant pump and toothed belt.

-- Pay attention to the seating of the centering piece -arrows- and seal -3-.

-- Tighten the coolant pump bolts. Refer to Figure.

-- After installing a new coolant pump -2-, remove the protective cap -1- from the drive wheel.

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .

Fig 2: Identifying Coolant Pump

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.