LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf R Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> COOLING SYSTEM [4-Cylinder Direct Injection (2.0L, 4V, Turbocharger, Chain Drive, Generation III)] >> 19 Cooling System >> Coolant Pump/Thermostat >> Coolant Pump Toothed Belt, Removing And Installing >> Installing

Coolant Pump Toothed Belt, Removing And Installing: Installing

Install In Reverse Order Of Removal And Note The Following: 

-- Replace the bolt for the drive wheel.

-- Drive gear installation position: the collar on the drive gear faces the transmission.

-- Position the toothed belt and tighten the bolts.

-- Fill with coolant. Refer to FILLING .

scientia non olet · About LEMON Manuals