Part II: Notes

Part I. Refer to PART I .

Fig 1: Exploded View Of Turbocharger, Part II

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Bolt
   • 9 Nm
2. Oil Return Line
3. O-ring
   • Replace after removing
   • Coat with engine oil
4. Bolt
   • 10 Nm
5. Charge Air Pressure Actuator -V465-
   • Adjusting. Refer to Charge Air Pressure Actuator -V465-, ADJUSTING .
6. Nut
   • 10 Nm
7. Bolt
   • 9 Nm
8. Connection
9. O-ring
   • Replace after removing
10. Bolt
    • 9 Nm
11. Turbocharger Recirculation Valve -N249-
    • Note the installation position. Refer to Figure.
12. O-ring
    • Replace after removing
13. Turbocharger
    • Removing and installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
14. O-ring
    • Replace after removing
    • Coat with coolant
15. Bolt
    • 9 Nm
16. Bolt
    • 9 Nm
17. Bolt
    • 9 Nm
18. Coolant Supply Line
19. O-ring
    • Replace after removing
    • Coat with coolant
20. O-ring
    • Replace after removing
    • Coat with engine oil
21. Bolt
    • 30 Nm
    • Coat the thread with hot bolt paste. Refer to the Parts Information.
22. Bracket
    • For the turbocharger
23. Bolt
    • 30 Nm
24. Bolt
    • 9 Nm