Charge Air Pressure Actuator -V465-, Adjusting: Procedure

-- If equipped, remove the noise insulation. Refer to NOISE INSULATION .

-- Loosen the clamp -1- for the catalytic converter -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Move the clamp -1- on the turbocharger.

-- Remove the nuts -2- from the catalytic converter -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows-.

Fig 1: Identifying Exhaust System Bracket (Suspended Mount) Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Move the catalytic converter slightly to the side.

-- Select the following menu item on Vehicle Diagnostic Tester:

• 0001 - Charge pressure actuator V465 adjusting 

-- Follow the instruction on Vehicle Diagnostic Tester.