LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf R Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> General, Technical Data (Engine 2.0L Turbocharger Chain Drive Gen. III) -- Golf R >> 00 General, Technical Data >> Identification >> Engine Number/Engine Specifications >> Notes

Engine Number/Engine Specifications: Notes

Engine Number 

The engine number ("engine codes" and "serial number") are located at the engine/transmission joint.

Fig 1: Locating Engine Number ("Engine Code" And "Serial Number")
GWWN00-10948Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The engine code is also stamped on the cylinder block behind the oil filter.

There is also a label glued to the timing chain cover with the "engine code" and "serial number".

The first three digits describe the mechanical structure of the engine and are still stamped on the engine. The fourth letter describes the engine torque and output and depends on the engine control module. The four digit engine code is located on the type label and the vehicle data label. It can also be read via the engine control module.

NOTE:

Vehicle data label locations

Refer to appropriate service information.