Transmission Fluid Temperature Sensor 2 -G754-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Audi S4, 2015 Audi S4, 2014 Audi S4, 2013 Audi S4, and 2012 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening Specification: Transmission Fluid Temperature Sensor 2 -G754- to transmission, 45 Nm
-- Attach the wiring harness to the transmission -arrows-.
-- Fill the transmission fluid (MTF). Refer to TRANSMISSION FLUID, DRAINING AND FILLING .
-- Clean the transmission and tunnel crossmember.