Right Flange Shaft, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Audi S4, 2015 Audi S4, 2014 Audi S4, 2013 Audi S4, and 2012 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Secure the transmission on the Engine And Transmission Holder VAS6095. Refer to SECURING ON ENGINE AND TRANSMISSION HOLDER .
-- Place the Used Oil Collection and Extraction Unit SMN372500 under the transmission.
-- Install the Lifting Eyebolt 3368 into a threaded hole in the right flange shaft.
-- Position the Slide Hammer Set VW771 with the VW771/13 on the Lifting Eyebolt 3368 and remove the flange shaft.