LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2016 >> Tiguan R-Line, FWD >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Wheels, Tires & Wheel Alignment (Suspension, Wheels And Steering) >> 44 Wheels, Tires, Wheel Alignment >> Removal And Installation >> Tire Pressure Sensor, (Service Version) >> Installing

Tire Pressure Sensor, (Service Version): Installing

CAUTION:
  • Clean the valve opening before installing the tire pressure sensor.

-- Press the tire pressure monitoring sensor -1- onto the disk wheel (rim) and tighten -arrow-.

Fig 1: Identifying Tire Pressure Sensor
GWWN44-10442Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Counterhold metal valve using retainer (for example 2 mm spiral bore) while doing so.

NOTE:

Visually check the valve after installing it and make sure it is tight. The tire pressure sensor -1- must not have any play when it is installed and it must touch the rim bed.

Do not tighten the valve again to the tightening specification after it has been installed.

scientia non olet · About LEMON Manuals