Wheel Alignment Prerequisites

• Suspension, wheel bearing, steering and steering linkage checked for excessive play and damage.
• Tread depth difference may be no more than 2 mm on an axle.
• Tires inflated to prescribed pressure.
• Curb weight of vehicle.
• Fuel tank must be full.
• Spare tire and vehicle tools are installed in appropriate position in vehicle.
• The water container for the windshield/headlamp cleaning system must be full.
• Be sure that sliding plates and turn tables are not touching end stop when checking wheel alignment

If necessary, contact manufacturer for familiarization with the proper use of the equipment.

After a certain period, wheel alignment platforms and computer equipment can lose their original leveling setting and adjustments.

Wheel Alignment Platforms and Wheel Alignment Analyzer/Computer Should Be Serviced and Calibrated At Least Once A Year.

-- Treat these highly sensitive units carefully and conscientiously!