LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2016 >> Tiguan R-Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Manual Transmission 0A6 - Controls & Housing) >> 34 Controls, Housing >> Removal And Installation >> Shift Unit Locking Pin

Shift Unit Locking Pin

WARNING: This page is about a different car, the 2014 Volkswagen Tiguan, 2013 Volkswagen Tiguan, and 2012 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

Fig 1: Identifying Locking Pin Removed From Shift Cover
GWWN34-1801Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the outer part of the locking pin.

-- Then carefully pry out the locking pin with a screwdriver.

Fig 2: Identifying Locking Pin Pressed In Into Shift Cover
GWWN34-1802Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Installed position:

The mark -arrow- faces toward upper part of gear shift shaft.