LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2016 >> Tiguan R-Line, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Final Drives, 01Z, 0BS, 0AY & 0BR >> 39 Final Drive, Differential >> Removal And Installation >> Rear Final Drive Bonded Rubber Bushings >> Installing

Rear Final Drive Bonded Rubber Bushings: Installing

Lower Bushing 

-- Pull the bushing far enough until the collar contacts the entire circumference on the final drive.

Fig 1: "Lower" Bonded Rubber Bushing, Pulling In
GWWN39-10287Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Upper Bushing 

-- Pull the bushing far enough until the collar contacts the entire circumference on the final drive.

Fig 2: "Upper" Bonded Rubber Bushing, Pulling In
GWWN39-10288Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Installed position of the buffers. Refer to BONDED RUBBER BUSHING OVERVIEW .