Checking Lateral Run-Out
-- Load the Tire Dial Gauge VAG 1435 approximately 2 mm.
-- Set up Tire Dial Gauge VAG 1435 on the side wall of the tire.
-- Slowly rotate the wheel.
-- Note the smallest and the largest dial readings.
NOTE:
If the difference is greater than 1.3 mm, the lateral run-out is too great.
In this case, lateral run-out can be reduced by matched mounting of the tire, refer to MATCHING .
Peak values on the Tire Dial Gauge VAG 1435 due to small irregularities in the rubber may be disregarded.