LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2016 >> Golf Base, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System (Cylinder Head & VALVETRAIN - CXBA, CNSA, CXBB, CNSB, CXCA, CXCB) >> 15 Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Timing Chain Cover, Removing And Installing >> Upper Timing Chain Cover, Removing And Installing >> Installing

Upper Timing Chain Cover, Removing And Installing: Installing

GWWA15-11235Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Replace seals.

-- Install the cover on the cylinder head the tighten the bolts hand tight. While doing so make sure that the seal lays correctly on the cylinder head.

-- Tighten the bolts -1 through 6- in the sequence shown. Refer to Timing Chain Guard Upper Cover - Tightening Sequence .

-- Install the Camshaft Adjustment Valve 1 -N205- and Exhaust Camshaft Adjustment Valve 1 -N318-. Refer to Camshaft Adjustment Valve 1 -N205- AND Exhaust Camshaft Adjustment Valve 1 -N318-, REMOVING AND INSTALLING .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals