LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2016 >> Golf Base, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System (Cylinder Head & VALVETRAIN - CXBA, CNSA, CXBB, CNSB, CXCA, CXCB) >> 15 Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Timing Chain Cover, Removing And Installing >> Lower Timing Chain Cover, Removing And Installing >> Removing

Lower Timing Chain Cover, Removing And Installing: Removing

-- Remove right front wheel housing liner. Refer to WHEEL HOUSING LINER .

-- Remove the engine support. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .

-- Remove the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .

-- Drain the engine oil. Refer to appropriate service information.

-- Remove the Oil Pressure Regulation Valve -N428-. Refer to Oil Pressure Regulation Valve -N428-, REMOVING AND INSTALLING .

-- Remove the ribbed belt tensioner. Refer to RIBBED BELT TENSIONER, REMOVING AND INSTALLING .

-- Free up the clip -2- for the electrical wiring harness.

-- Remove the screw -1-.

-- Unclip the guide tube from the timing chain upper cover in direction of -arrow-.

-- Remove the guide tube from the timing chain guard.

GWWA17-10824Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1 through 15-.

GWWN15-10474Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

There may be only eight bolts installed, depending on the version.

-- Pry off the lower timing chain cover.