LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2016 >> Golf Base, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System (Cylinder Head & VALVETRAIN - CXBA, CNSA, CXBB, CNSB, CXCA, CXCB) >> 15 Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Timing Chain Cover, Removing And Installing >> Lower Timing Chain Cover, Removing And Installing >> Installing

Lower Timing Chain Cover, Removing And Installing: Installing

NOTE:

Be sure to check the expiration date of the silicone sealant.

Refer to the parts information for the silicone grease.

The cover must be installed within five minutes after applying the silicone sealant.

Replace the bolts that were tightened with an additional turn.

Replace sealing ring and O-ring.

Risk of contaminating the lubricating system. Cover open parts of engine.

-- Remove any sealant residue on the cylinder block using a flat blade scraper.

-- Clean any oil or grease off the sealing surfaces.

-- Make sure both alignment bushings for centering the cover -arrows- are present.

GWWA15-10456Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Cut the tube nozzle at the front marking (nozzle diameter: approximately 3 mm).

GWWA17-0081Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals