LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2016 >> Golf Base, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System (Cylinder Head & VALVETRAIN - CXBA, CNSA, CXBB, CNSB, CXCA, CXCB) >> 15 Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Timing Chain Cover, Removing And Installing >> Lower Timing Chain Cover, Removing And Installing >> Cover with 15 bolts

Cover with 15 bolts

GWWA15-11462Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Apply the Silicone Sealant:D 174 003A2  to the clean sealing surface -arrow 1- and on the edges -arrows 2- of the new cover as shown in the illustration.

-- Immediately attach the cover and tighten the bolts. 

GWWA15-10397Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Tighten the bolts -3 and 6- with an additional turn after installing the vibration damper. The bolts must be removed again to install the vibration damper.

-- Tighten the bolts -1 through 15- in the sequence shown. Refer to OVERVIEW - TIMING CHAIN COVER .

scientia non olet · About LEMON Manuals