Lower Cover For Timing Chain - Tightening Sequence for Eight Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Tighten the Steel Bolts -1 through 8- in Three Stages in the Sequence Shown: 

1 -Bolts -1 through 8- 8 Nm

2 -Bolts -2 to 3 and 5 to 8- 45° additional turn

3 -Bolts -1 and 4- After installing the vibration damper tighten with an additional turn.

Tighten the Aluminum Bolts -1 through 8- in Three Stages in the Sequence Shown: 

1 -Bolts -1 through 8- 4 Nm

2 -Bolts -2 to 3 and 5 to 8- 45° additional turn

3 -Bolts -1 and 4- After installing the vibration damper tighten with an additional turn.