LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2016 >> Golf Base, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System (Cylinder Head & VALVETRAIN - CXBA, CNSA, CXBB, CNSB, CXCA, CXCB) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Overview - Camshaft Timing Chains >> Overview - Camshaft Timing Chain, Engine Codes CHHB, CNTA, CXCA, CXDA, CXCB And CXDB >> Bearing Bracket - Assembly Instructions

Bearing Bracket - Assembly Instructions

GWWN15-11326Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

If a new bearing bracket -3- with adapter sleeve -4- should be installed, it must be checked before installing the bearing bracket in the hole -arrow- in the cylinder head -1-.

If the hole -arrow- is not designed for using the adapter sleeve -4- the adapter sleeve must be removed from the bearing bracket. For this hole the short bolt -2- should be used. Refer to the parts information for the correct bolt.

scientia non olet · About LEMON Manuals