LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2016 >> Golf Base, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System (Cylinder Head & VALVETRAIN - CXBA, CNSA, CXBB, CNSB, CXCA, CXCB) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Overview - Balance Shaft Drive Chain >> Intermediate Sprocket Tightening Sequence

Intermediate Sprocket Tightening Sequence

GWWA15-10464Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Always replace the intermediate sprocket. Otherwise the backlash will not adjust itself and it could result in engine damage.

The new intermediate sprocket has an anti-friction coating that wears off after a short period of use, which automatically adjusts the backlash.

Step Bolts Tightening Specification/Additional Turn
1. -1- 10 Nm
2. -1- The intermediate sprocket must not have any play. Loosen and tighten it again if necessary.
3. -1- 25 Nm
4. -1- Turn an additional 90°