LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2016 >> Golf Base, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System (Crankshaft & Cylinder Block - Service Information - CXBA, CNSA, CXBB, CNSB, CXCA, CXCB) >> 13 Crankshaft, Cylinder Block >> Piston And Connecting Rod >> Connecting Rods, Checking Radial Clearance >> Procedure

Connecting Rods, Checking Radial Clearance: Procedure

-- Remove the connecting rod bearing cap.

-- Clean the bearing cap and journal.

-- Place the Plastigauge® over the entire width of the bearing journal or into the bearing shells.

-- Position the connecting rod bearing cap and tighten the old bolts -item 1-  OVERVIEW - PISTON AND CONNECTING ROD List Item:Connecting Rod Bolts without turning the crankshaft.

-- Install the connecting rod bearing cap.

-- Compare width of Plastigauge® with calibrated scale.

scientia non olet · About LEMON Manuals