LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2016 >> Golf Base, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System (Crankshaft & Cylinder Block - Service Information - CXBA, CNSA, CXBB, CNSB, CXCA, CXCB) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Flywheel, Removing And Installing >> Removing

Flywheel, Removing And Installing: Removing

GWWA30-0102Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Remove the bolts -B- by hand. Do not use an air-powered or impact wrench.

When removing bolts, ensure bolt head does not come in contact with the flywheel.

Turn the flywheel -A- until the bolts -B- line up with the holes -arrows-.

GWWN13-10563Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the :3067  into the hole in the cylinder block -B-.

-- Loosen and remove bolts for flywheel.

scientia non olet · About LEMON Manuals