Vibration Damper, Removing And Installing: Notes
Special tools and workshop equipment required
- Counterhold - Vibration Damper:T10355
- Locking Pin:T10060A
- Assembly Tool:T10531
Individual components of the Assembly Tool:T10531 :
- Counterhold Tool:T10531/1
- Tensioning Pins:T10531/2
- Turning Over Tool:T10531/3
- Collar Nut:T10531/4
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Timing Chain Cover
- Bolt - Vibration Damper
- O-ring - Vibration Damper
The vibration damper bolt -A- connects the vibration damper -1- timing chain connection -2- and the crankshaft -3-. Secure the chain sprocket as described as follows to the crankshaft, before removing the vibration damper.