LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2016 >> Golf Base, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System (Crankshaft & Cylinder Block - Service Information - CXBA, CNSA, CXBB, CNSB, CXCA, CXCB) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Overview - Crankshaft >> Crankshaft, Tightening Sequence

Crankshaft, Tightening Sequence

GWWA13-11055Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the crankshaft bolts in the sequence -1 to 10- and -arrow A- as follows.

Step Bolts Tightening Specification/Additional Turn
1. -1- through -10- and -arrows A- Install hand-tight
2. -1- through -10- 65 Nm
3. -1- through -10- Turn an additional 90°
4. -A arrows- 20 Nm
5. -A arrows- Turn an additional 90°
scientia non olet · About LEMON Manuals