Crankshaft Needle Bearing, Replacing: Notes
Only for Vehicles Equipped with a Twin Clutch Transmission
Special tools and workshop equipment required
- Counter-support for example Puller - Kukko Counterstay:22/1
- Internal puller, for example Puller - Kukko Internal - 14-19mm :21/2
- Bearing Installer - Bearing Press Piece:VW207C
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bearing - Crankshaft Needle
Conditions
- Always replace the needle bearing -arrow- after the engine and transmission are separated.
- The front edges of the internal puller must not be broken off.