Overview - Balance Shaft: Notes
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
- Bolt
- 4 Nm 45°
- Replace after removing
- Balance Shaft
- Needle Bearing Rim
- Replace the balance shaft after each removal.
- Install a new needle bearing with the same color identification
- Pipe for Balance Shaft
- Cylinder Block
- Balance Shaft Seal Intake Side
- Balance Shaft
- Needle Bearing Rim
- Replace the balance shaft after each removal.
- Install a new needle bearing with the same color identification
- Bolt
- 4 Nm 45°
- Replace after removing