Overview - SUBFRAME Mount
- Bolt
- Replace after removing
- Tightening specification and sequence. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
- Engine Support
- Removing and installing. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .
- Engine Mount
- With support arm
- Removing and installing. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
- Bolt
- 40 Nm + 90° turn
- Replace after removing
- Bolt
- 20 Nm + 90° turn
- Replace after removing
- Bolt
- 40 Nm + 90° turn
- Replace after removing
- Bolt
- 60 Nm +90° turn
- Replace after removing
- Pendulum Support
- Removing and installing. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
- Bolt
- Replace after removing
- Tightening specification and sequence. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
- Bolt
- Replace after removing
- Tightening specification and sequence. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
- Bolt
- Replace after removing
- Tightening specification and sequence. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
- Bolt
- 60 Nm + 90° turn
- Replace after removing
- Bolt
- 60 Nm + 90° turn
- Replace after removing
- Transmission Mount
- With support arm
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
- Bolt
- 50 Nm + 90° turn
- Replace after removing