Vehicles with engine code CHHC, CXDA and CXDB

-- Press the release button on the crankcase ventilation hose -2- and remove the hose.

On Vehicles with Engine Codes CXBA, CXBB, CNSB, CXCA, CNTB, CNTA, CXCB

-- Remove the support -Item Connection- and -Item 6- OVERVIEW - CRANKCASE VENTILATION - List Item:Hose together with the hose -2-.

Continuation for All Vehicles

-- Remove the bolts -1- and then remove the connections.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -2 and 3-, and remove the oil supply line and oil return pipe.

-- Open the hose clamp -arrow-.

NOTE:

The following work step is necessary to achieve some more room between the cylinder head and the bulkhead.

-- Remove screws -1, 2 and 3- and remove pendulum support.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pull the engine toward the rear with the :T10038 approximately 20 mm.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the nuts -arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the turbocharger from the cylinder head and pry up upward.