Transmission Tightening Specifications
Transmission to engines: 2.0L TDI; 2.0L TFSI
NOTE:
The -arrows- point to the alignment sleeves in the engine.
When removing and installing pay attention to the different bolt lengths.
If necessary the bolt length may differ from the illustration.
- 1 -
Direction of Travel
- M12 -
80 Nm
- If the torque wrench is used with the :T10179 : 65 Nm
- M10 -
40 Nm
- These bolts are located inside the lower flange
| Component | Tightening Specification |
|---|---|
| Cable bracket on the transmission cover | 10 Nm |