Battery Fan, Removing And Installing: Notes
WARNING: This page is about a different variant/trim than selected.
Battery Fan 1 -V457- is installed under a ventilation guide on the right side of the Hybrid Battery Unit -AX1-.
Be careful not to damage the foam seal on the ventilation guide when removing and installing Battery Fan 1 -V457- and that it seals the contact surface all the way around.
It is not necessary to de-energize the high voltage system.
Special Tools And Workshop Equipment Required
- Torque Wrench 1331 5-50Nm :VAG1331
WARNING:
Read and follow the High Voltage Electrical System General Warnings. Refer to HIGH VOLTAGE SYSTEM GENERAL WARNINGS .