Electric Drive Power and Control Electronics -JX1-, REMOVING AND INSTALLING: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tools And Workshop Equipment Required
- Torque Wrench 1331 5-50Nm :VAG1331
- Hose Clamps - Up To 25mm :3094
WARNING:
Read and follow the High Voltage Electrical System General Warnings. Refer to HIGH VOLTAGE SYSTEM GENERAL WARNINGS .
CAUTION:
Pay attention to the instructions for handling high voltage cables. Refer to HIGH VOLTAGE SYSTEM GENERAL WARNINGS .
WARNING:
Hybrid vehicle high voltage in the high voltage system. Danger of electrocution! The following procedure requires working on the high voltage system. Disable the high voltage system now. Refer to High Voltage System, De-Energizing .