Coolant, Draining And Filling: Draining
WARNING: This page is about a different variant/trim than selected.
CAUTION:
The cooling system is under pressure when the engine is warm. Risk of scalding due to hot steam and hot coolant.
Scalding the skin and other parts of the body is possible.
- Wear safety gloves.
- Wear protective eyewear.
- Reduce the pressure by covering the coolant expansion tank cap with a cloth and carefully opening it.
-- Carefully open the cap -1- on the coolant expansion tank -2- in the direction of the -arrow-.
-- Remove the noise insulation. Refer to NOISE INSULATION .
-- Place the :VAS6208 underneath.
-- Disconnect the connector -2- on the Engine Coolant Temperature Sensor on Radiator Outlet -G83-.
-- Lift the clamp -3- and remove the lower right coolant hose from the radiator. Allow the coolant to drain.