Coolant, Filling, Without Electric Vacuum Pump: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tools And Workshop Equipment Required
- Analog Refractometer :T10007B
- Shop Crane - Drip Tray :VAS6208
- Hose Clip Pliers :VAS6340
- Cooling System Charge Kit :VAS6096
- Cooling System Tester - Adapter :VAG1274/8
- Protective Eyewear
- Safety Gloves
Conditions:
- The coolant was drained as described. Refer to DRAIN THE COOLANT .
NOTE:
If the Cooling System Charge Kit - Electric Vacuum Pump :VAS6096/2 use it to fill the cooling system. Refer to COOLANT, FILLING WITH Cooling System Charge Kit - Electric Vacuum Pump .
Using the Cooling System Charge Kit - Electric Vacuum Pump :VAS6096/2 will achieve a greater vacuum in the cooling system. The higher vacuum results in less air in the cooling system after filling. For this reason a >>shorter<< bleeding can be performed. Refer to Vehicle Diagnostic Tester.