Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different variant/trim than selected.

-- Briefly open the coolant reservoir cap -1- to reduce the residual pressure in the coolant system.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the noise insulation -1-. Refer to NOISE INSULATION .

-- Disconnect the connector -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove clamp -2- and Engine Coolant Temperature Sensor on Radiator Outlet -G83-.

NOTE:

Place a cleaning cloth underneath, to catch coolant leaking out.

Insert the new Engine Coolant Temperature Sensor on Radiator Outlet -G83- immediately in the connection to prevent coolant loss.