Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING, VERSION 3: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal and note the following:
If the Charge Air Cooling Pump -V188- was removed from the bracket:
-- Engage the bottom of the retaining bracket -item ) Charge Air Cooling Pump -V188-, VERSION 3 - Retaining Bracket- in the bracket -item ) OVERVIEW - Charge Air Cooling Pump -V188-, VERSION 3-.
-- Remove the Charge Air Cooling Pump -V188-.
-- Make sure that the raised section on the rubber bracket -item ) Charge Air Cooling Pump -V188-, VERSION 3 - Rubber Bracket is in retaining bracket recess -item ) Charge Air Cooling Pump -V188-, VERSION 3 - Retaining Bracket-.
NOTE:
Secure all hose connections with standard production hose clamps.
-- Check the coolant level. Refer to Coolant Level, Checking After Repair .