Coolant Pump Toothed Belt Sprocket, Removing And Installing, Version 2: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal and note the following:
-- Installing the toothed belt sprocket:
- The grooves -1 and 2- in the camshaft are positioned asymmetrically.
- The openings -arrows- in the toothed belt sprocket are likewise positioned asymmetrically.
-- Place the toothed belt sprocket on the camshaft so the asymmetrical grooves are exactly in the center of the openings.
-- Install the coolant pump. Refer to COOLANT PUMP, REMOVING AND INSTALLING .