LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2015 >> Jetta S, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Cooling System (General & Service Information - CNLA, CRJA)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Installing

Coolant Pipes, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal and note the following:

NOTE:

Replace the gaskets and seals.

Secure all hose connections with standard production hose clamps.

-- Check the coolant level. Refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals